Best Interest and Order Execution Policy

Summary of Best Interest and Order Execution Policy

1. Introduction

1.1. This Summary Best Interest and Order Execution Policy (“the Policy”) is provided to you (our Client or prospective Client) in accordance with the Provision of Investment Services, the Exercise of Investment Activities, the Operation of Regulated Markets and Other Related Matters Law 144(I)/2007, as subsequently amended from time to time (“the Law”). Pursuant to the Law, Rodeler Limited (“the Company”, “we”) is required to take all reasonable steps to act in the best interest of its Clients when executing Client Orders and to achieve the best execution results when executing Client Orders and to comply, in particular, with the principles set out in the Law when providing investment services.

Further to this, the Client also agrees/consents to the fact that his orders will be executed outside Regulated Market (e.g. Licensed European Stock Exchange) or a Multilateral Trading Facility (e.g. European Financial Trading System).

By opening a Trading Account you agree/consent to the fact that your Orders will be executed outside a Regulated Market (e.g. Licensed European Stock Exchange) or a Multilateral Trading Facility (e.g. European Financial Trading System).

The Company executes Client Orders in relation to the following Financial Instruments:

  • Contracts for Differences (“CFDs”) in stocks, commodities, indices and currency pairs (FX);
  • Binary Options in stocks, commodities, indices and currency pairs (FX);

Collectively, the CFDs and Binary Options are referred to as the Financial Instruments in this Policy.

2. Scope

2.1. This Policy applies to both Retail and Professional Clients (as defined in the Company’s Client Categorisation Policy found on the Company’s website at (Click Here). If the Company classifies a Client as an Eligible Counterparty, this Policy does not apply to such a Client.

2.2. This Policy applies when executing Client Orders for the Client for all the types of CFDs and Binary Options offered by the Company.

3. Best Execution Factors:

3.1. When executing Orders, we will take all reasonable steps to achieve/obtain the best possible outcome/result (“Best Execution”) for you, taking into account price, costs, speed, likelihood of execution and settlement, size, nature or any other consideration relevant to the execution of the Order (“Best Execution Factors”), as follows:

3.2 For Clients requesting to trade in Binary Options:

(a) Price: For any given Binary Option, the Company will quote one price at which the Client can open an Order. The types of Binary Options offered by the Company from time to time are disclosed on the Company’s website and/or trading platform. The Company will quote to Clients the price provided by the Execution Venue (see Section 7 below). The Execution Venues calculate and provide their own tradable prices for a given Binary Option by reference to the BID and ASK prices of the relevant underlying asset, which the Execution Venues obtain from third party reputable external reference sources (i.e. price feeders). The Company’s prices can be found on the Company’s trading platforms. The Company updates its prices as frequently as the limitations of technology and communications links allow.

The main way in which the Company will ensure that the Client receives the best price will be to ensure that the calculation of the quoted price is made with reference and compared to a range of underlying price providers and data sources. The Company reviews regularly or at least once a year its Execution Venues to ensure that relevant and competitive pricing is offered.

Despite the fact that the Company takes every reasonable step to obtain the best possible result for its Clients, it does not guarantee that when executing an Order its price will be more favourable than one which might be available elsewhere.

Under certain trading conditions it may be impossible to execute at the Client's requested price. In this case, the Company has the right to execute the Order at the first available price. This may occur, for example, at times of rapid price fluctuations if the price rises or falls in one trading session to such an extent that, under the rules of the relevant exchange, trading is suspended or restricted, or this may occur at the opening of trading sessions. The available prices provided by the Execution Venues for Binary Options can take any value between the BID and ASK prices of the underlying asset (usually the average of the BID and ASK prices).

(b) Costs

No commissions or financing fees are charged by the Company for Binary Options trading.

Should the Company at any period of time decide not to charge any costs, it shall not be construed as a waiver of its rights to apply them in the future, with prior notice to the Client as explained in the Client Agreement found on the Company’s website . Such notice may be sent personally to the Client and/or posted on the Company’s website

(c) Speed of Execution: The Company does not execute the Client Orders in Binary Options as a principal to principal against the Client, i.e. the Company is not the Execution Venue (as defined in Commission Directive 2006/73/EC implementing MiFID) for the execution of the Client’s Order. The Company arranges for the execution of Client Orders with the Execution Venues (see Section 7 below). The Company places a significant importance when executing Client Orders and strives to offer high speed of execution within the limitations of technology and communications links. For instance, in cases where Clients are using a wireless connection or a dial up connection or any other communication link that can cause a poor internet connection then this may cause unstable connectivity with the Company's trading platform resulting to the Client placing his Orders at a delay and hence the Orders to be executed at better or worst prevailing price offered by the Company.

(d) Likelihood of Execution: The Company arranges for the execution of Client Orders with the Execution Venues (i.e. see Section 7 below); hence, execution may sometimes be difficult. The likelihood of execution depends on the availability of prices of the Execution Venue(s). In some case it may not be possible to arrange an Order for execution, for example but not limited in the following cases: during news times, trading session start moments, during volatile markets where prices may move significantly up or down and away from declared prices, where there is rapid price movement, where there is insufficient liquidity for the execution of the specific volume at the declared price, a force majeure event has occurred.

In the event that the Company is unable to proceed with an Order with regard to price or size or other reason, the Order will be executed at the first available price or not executed at all. In addition, the Company is entitled, at any time and at its discretion, without giving any notice or explanation to the Client, to decline or refuse to transmit or arrange for the execution of any Order or Request or Instruction of the Client in circumstances explained in the Client Agreement found on the Company’s website

(e) Likelihood of settlement: The Company shall proceed to a settlement of all transactions upon execution of such transactions. The Binary Options offered by the Company do not involve the delivery of the underlying asset, so they are not settled physically as there would be for example if the Client had bought shares. All Binary Options are cash settled.

(f) Size of Order: All Orders are placed in monetary values. The Client will be able to place Order(s) as long as he has enough balance in his trading account.

The minimum size of an Order may be different for each type of Binary Options . Please refer to the Company’s trading platform or website for the value of minimum size of an Order in each type of Binary Options as well as the value of the maximum size of a single Order.

If you wish to execute a large size Order(above average order size), in some cases the price may become less favourable. The Company reserves the right to decline an Order in case the size of the Order is large and cannot be filled by the Company or for any other reason as explained in the Client Agreement found

(g) Market Impact: Some factors may rapidly affect the price of the underlying instruments/products from which the Company’s quoted price is derived and may also affect other factors listed herein. The Company will take all reasonable steps to obtain the best possible result for its Clients.

The Company does not consider the above list exhaustive and the order in which the above factors are presented shall not be taken as priority factor.

3.2.1. Different Types of Trading Accounts in Binary Options:

The Company offers different types of Trading Accounts in Binary Options. For example; VIP, Platinum, Gold, Standard Accounts etc. In this respect, the initial minimum deposit may differ according to each type of Trading Account. Further information regarding the different types of Trading Accounts offered can be found on the Company’s website (Click here) or by contacting support at [email protected].

3.2.2. Different Types of Binary Options:

The Company offers different types of Binary Options. For example, High/Low, Short Term, One Touch, Boundary, etc. In this respect, the minimum/maximum size of an Order, the percentage of return, etc. may differ according to each type of Binary Option. Further information regarding the different types of Binary Options offered can be found on the Company’s website or trading platform.

(a) Slippage You are warned that Slippage may occur when trading in Binary Options. This is the situation when at the time that an Order is presented for execution, the specific price showed to the Client may not be available; therefore the Order will be executed close to or a number of pips away from the Client’s requested price. So, Slippage is the difference between the expected price of an Order, and the price the Order is actually executed at. If the execution price is better than the price requested by the Client, this is referred to as positive slippage. If the executed price is worse than the price requested by the Client, this is referred to as negative slippage. Please be advised that Slippage is a normal element when trading in Binary Options. Slippage more often occurs during periods of low liquidity, high volatility (for example due to news announcements, economic events and market openings and other factors) and large market orders that making an Order at a specific price impossible to execute. In other words, your Orders may not be executed at declared prices.

3.3. For Clients requesting to trade in CFDs:

(a) Price: BID – ASK Spread: For any given CFD, the Company will quote two prices: the higher price (ASK) at which the Client can buy (go long) that CFD, and the lower price (BID) at which the Client can sell (go short) that CFD. Collectively, the ASK and BID prices are referred to as the Company’s prices. The difference between the lower and the higher price of a given CFD is the spread.

Company’s Prices: The Company will quote to Clients the prices provided by the Execution Venues (see Section 7 below). The Execution Venues calculate and provide their own tradable prices for a given CFD by reference to the prices of the relevant underlying asset, which the Execution Venues obtain from third party reputable external reference sources (i.e. price feeders). The Company’s prices can be found on the Company’s trading platforms. The Company updates its prices as frequently as the limitations of technology and communications links allow.

The main way in which the Company will ensure that the Client receives the best price will be to ensure that the calculation of the bid/ask spread is made with reference and compared to a range of underlying price providers and data sources. The Company reviews regularly or at least once a year its Execution Venues to ensure that relevant and competitive pricing is offered.

Despite the fact that the Company takes every reasonable step to obtain the best possible result for its Clients, it does not guarantee that when executing an Order its price will be more favourable than one which might be available elsewhere.

Pending Orders: Such Orders as Buy Limit, Buy Stop and Stop Loss, Take profit for opened short position are executed at ASK price. Such Orders as Sell Limit, Sell Stop and Stop Loss, Take profit for opened long position are executed at BID price.

If the price reaches an Order set by you such as: Stop Loss, Take Profit, Buy Limit, Buy Stop, Sell Limit or Sell Stop, then these Orders are automatically executed. However, under certain trading conditions it may be impossible to execute Orders (Stop Loss, Take Profit, Buy Limit, Buy Stop, Sell Limit or Sell Stop) at the Client's requested price. In this case, the Company has the right to execute the Order at the first available price. This may occur, for example, at times of rapid price fluctuations if the price rises or falls in one trading session to such an extent that, under the rules of the relevant exchange, trading is suspended or restricted, or this may occur at the opening of trading sessions. The minimum level for placing Stop Loss, Take Profit, Buy Limit, Buy Stop, Sell Limit and Sell Stop orders, for a given CFD, is specified in the Client Agreement and/or the Company’s website at (Click here)

(b) Costs: For opening a position in some types of CFDs the Client may be required to pay commission or financing fees, the amount of which is disclosed on the Company's website at xxx.

Commissions: Commissions may be charged either in the form of a percentage of the overall value of the trade or as fixed amounts. More information on commissions can be found on the Company’s website at xxx.

Financing Fee: In the case of financing fees, the value of opened positions in some types of CFDs is increased or reduced by a daily financing fee “swap rate” throughout the life of the CFD (i.e. until the position is closed). Financing fees are based on prevailing market interest rates, which may vary over time. Details of daily financing fees applied are available on the Company’s website at xxx.

For all types of CFDs that the Company offers, the commission and financing fees are not incorporated into the Company’s quoted prices and are instead charged explicitly to the Client account.

Should the Company at any period of time decide not to charge such costs, it shall not be construed as a waiver of its rights to apply them in the future, with prior notice to the Client as explained in the Client Agreement found on the Company’s website at (Click here) Such notice may be sent personally to the Client and/or posted on the Company’s website at (Click here)

(c) Speed of Execution: The Company does not execute the Client Order in CFDs as a principal to principal against the Client, i.e. the Company is not the Execution Venue (as defined in Commission Directive 2006/73/EC implementing MiFID) for the execution of the Client’s Order. The Company arranges for the execution of Client Orders with the Execution Venue. The Company places a significant importance when executing Client Orders and strives to offer high speed of execution within the limitations of technology and communications links. For instance, in cases where Clients are using a wireless connection or a dial up connection or any other communication link that can cause a poor internet connection then this may cause unstable connectivity with the Company's trading platform resulting to the Client placing his Orders at a delay and hence the Orders to be executed at better or worst prevailing price offered by the Company.

(d) Likelihood of Execution: The Company arranges for the execution of Client Orders with third party(ies) (i.e. Execution Venues); hence, execution may sometimes be difficult. The likelihood of execution depends on the availability of prices of the Execution Venue(s). In some case it may not be possible to arrange an Order for execution, for example but not limited in the following cases: during news times, trading session start moments, during volatile markets where prices may move significantly up or down and away from declared prices, where there is rapid price movement, where there is insufficient liquidity for the execution of the specific volume at the declared price, a force majeure event has occurred.

In the event that the Company is unable to proceed with an Order with regard to price or size or other reason, the Order will not be executed. In addition, the Company is entitled, at any time and at its discretion, without giving any notice or explanation to the Client, to decline or refuse to transmit or arrange for the execution of any Order or Request or Instruction of the Client in circumstances explained in the Client Agreement found at (Click here)

(e) Likelihood of settlement: The Company shall proceed to a settlement of all transactions upon execution of such transactions. The Financial Instruments of CFDs offered by the Company do not involve the physical delivery of the underlying asset, so they are not settled physically as there would be for example if the Client had bought shares. All CFDs are cash settled.

(f) Size of order: All Orders are placed in monetary values. The Client will be able to place Order(s) as long as he has enough balance in his trading account.

The minimum size of an Order may be different for each type of Binary Option. Please refer to the Company’s trading platform or website at (Click here) for the value of minimum size of an Order in each type of Binary Options as well as the value of the maximum size of a single Order.

If you wish to execute a large size Order (above average order size), in some cases the price may become less favourable. The Company reserves the right to decline an Order in case the size of the Order is large and cannot be filled by the Company or for any other reason as explained in the Client Agreement found at (Click here)

(g) Market Impact: Some factors may rapidly affect the price of the underlying instruments/products from which the Company’s quoted price is derived and may also affect other factors listed herein. The Company will take all reasonable steps to obtain the best possible result for its Clients.

The Company does not consider the above list exhaustive and the order in which the above factors are presented shall not be taken as priority factor.

3.3.1. Types of Order(s) in Trading in CFDs:

The particular characterising of an Order may affect the execution of the Client’s Order. Please see below the different types of Orders that a Client can be placed:

(a) Market Order(s) A Market Order is an Order to buy or sell a CFD as promptly as possible at the prevailing market price. Execution of this Order results in opening a trade position. CFDs are bought at ASK price and sold at BID price. Stop Loss and Take Profit Orders can be attached to a Market Order. Market Orders are offered for all type of accounts.

(b) Pending Order(s) This is an Order to buy or sell a CFD in the future at the best available price once a certain price is reached. The Company offers the following types of Pending Orders: Buy Limit, Buy Stop, Sell Limit or Sell Stop Orders to trading accounts for CFDs.

A Pending order is an Order that allows the user to buy or sell a CFD at a pre-defined price in the future. These Pending Orders are executed once the price reaches the requested level. However, it is noted that under certain trading conditions it may be impossible to execute these Orders at the Client's requested price. In this case, the Company has the right to execute the Order at the first available price. This may occur, for example, at times of rapid price fluctuations of the price, rises or falls in one trading session to such an extent that, under the rules of the relevant exchange, trading is suspended or restricted, or there is lack of liquidity, or this may occur at the opening of trading sessions.

It is noted that Stop Loss and Take Profit may be attached to a Pending Order. Also, pending orders are good till cancel. Pending Orders are offered for all type of accounts.

(c) Take Profit Take Profit Order is intended for gaining the profit when the CFD’s price has reached a certain level. Execution of this Order results in complete closing of the whole position. It is always connected to an open, market or a pending Order. Under this type of order, the Company’s trading platform checks long positions with Bid price for meeting of this order provisions (the order is always set above the current Bid price), and it does with Ask price for short positions (the order is always set below the current Ask price).

(c) Stop Loss Stop Loss Order is used for minimising of losses if the CFD’s price has started to move in an unprofitable direction. If the CFD’s price reaches this stop loss level, the whole position will be closed automatically. Such Orders are always connected to an open, market or a pending order. Under this type of orders, the Company’s trading platform checks long positions with Bid price for meeting of this order provisions (the order is always set below the current Bid price), and it does with Ask price for short positions (the order is always set above the current Ask price).

3.3.2. Execution Practices in CFDs

(a) Slippage

You are warned that Slippage may occur when trading in CFDs. This is the situation when at the time that an Order is presented for execution, the specific price showed to the Client may not be available; therefore the Order will be executed close to or a number of pips away from the Client’s requested price. So, Slippage is the difference between the expected price of an Order, and the price the Order is actually executed at. If the execution price is better than the price requested by the Client, this is referred to as positive slippage. If the executed price is worse than the price requested by the Client, this is referred to as negative slippage. Please be advised that Slippage is a normal element when trading in CFDs. Slippage more often occurs during periods of illiquidity or higher volatility (for example due to news announcements, economic events and market openings and other factors) making an Order at a specific price impossible to execute. In other words, your Orders may not be executed at declared prices.

Slippage may appear in all types of accounts we offer. It is noted that Slippage can occur also during Stop Loss, Take Profit and other types of Orders (see Section 3.3.1. above). We do not guarantee the execution of your Orders at the price specified. However, we confirm that your Order will be executed at the next best available price from the price you have specified under your Order.

3.3.3. Different Types of Trading Accounts in CFDs:s

The Company offers different types of Trading Account. For example: Silver, Gold Platinum, Islamic account etc. In this respect, the initial minimum deposit, the spreads, costs, size commissions, if any etc. may differ according to each type of Trading Account. Further information regarding the different type of Trading Accounts offered can be found on the Company’s website at (Click here)

4. Best Execution Criteria

4.1. When executing client orders, the Company takes into account the following criteria for determining the relative importance of the Best Execution Factors referred in paragraph 3 above:

a) The characteristics of the Client including the categorization of the client as retail or professional;
b) The characteristics of the Client Order;
c) The characteristics of the Financial Instruments that are the subject of that Order;
d) The characteristics of the Execution Venue to which that Order is directed;

The Company determines the relative importance it assigns, in accordance with the abovementioned criteria, to the Best Execution Factors by using its commercial judgment and experience in light of the information available on the market and taking into account the remarks included in paragraph 3. The Company assigns the following importance level to the Best Execution Factors:

FACTOR

IMPORTANCE

LEVEL

REMARKS

Price

High

We give strong emphasis on the quality and level of the price data that we receive from external sources (i.e. Execution Venues) in order to provide our Clients with competitive price quotes.

Costs

High

We take all reasonable steps to keep the costs of your transactions as low and competitive, to the extent possible.

Speed of Execution

High

Execution speed and the opportunity for price improvement are critical to every trader and we repeatedly monitor this factor to ensure we maintain our high execution standards

Likelihood of Execution

High

Even though we reserve the right to decline a Client order we aim to execute all Client Orders, to the extent possible.

Likelihood of Settlement

Medium

See relevant description in Best Execution Factors (See Section 3.2 for Binary Options and 3.3 for CFDs).

Size of Order

Medium

See relevant description in Best Execution Factors (Section 3.2 for Binary Options and 3.3 for CFDs).

Market Impact

Medium

See relevant description in Best Execution Factors (Section 3.2 for Binary Options and 3.3 for CFDs).

Nature of Order

Medium

See relevant description in Best Execution Factors (Section 3.3.1 for CFDs).

Where the Company executes an order on behalf of a Retail Client, the best possible result shall be determined in terms of the total consideration, representing the price of the financial instrument and the costs related to execution, which shall include all expenses incurred by the Client which are directly related to the execution of the Order, including execution venue fees, clearing and settlement fees and any other fees paid to third parties involved in the execution of the Order.

For the purposes of delivering best execution where there is more than one competing Execution Venues to execute an Order, in order to assess and compare the results for the Client that would be achieved by executing the Order on each of the execution venues (see Paragraph 7 below) that is capable of executing that Order, the Company's own commissions and costs for executing the order on each of the eligible execution venues shall be taken into account in that assessment. The Company shall not structure or charge commissions in such a way as to discriminate unfairly between execution venues.

5.Client’s Specific Instruction

5.1. Whenever there is a specific instruction from or on behalf of a Client (e.g. fills in the required parts on the Company’s trading platform when placing an Order), relating to the Order or the specific aspect of the Order the Company shall arrange – to the extent possible – for the execution of the Client Order strictly in accordance with the specific instruction.

WARNING: It is noted that any specific instructions from a Client may prevent the Company from taking the steps that it has designed and implemented in this Policy to obtain the best possible result for the execution of those Orders in respect of the elements covered by those instructions. However, it shall be considered that the Company satisfies its obligation to take all reasonable steps to obtain the best possible result for the Client.

5.2. Trading rules for specific markets or market conditions may prevent the Company from following certain of the Client’s instructions.

6. Execution on Client Orders

6.1. The Company shall satisfy the following conditions when carrying out Client Orders:

a) ensures that Orders executed on behalf of Clients are promptly and accurately recorded and allocated;

b) carries out otherwise comparable Client Orders sequentially and promptly unless the characteristics of the Order or prevailing market conditions make this impracticable, or the interests of the Client require otherwise;

c) informs a Retail Client about any material difficulty relevant to the proper carrying out of orders promptly upon becoming aware of the difficulty.

7. Execution Venues

7.1. Execution Venues are the entities with which the Orders in Financial Instruments are placed and executed. The Company does not execute Client Orders in Financial Instruments on an own account basis, as principal to principal against the Client. The Company uses third party Financial Institution(s) as Execution Venues. The Execution Venue currently used by the Company is Richfield Capital Limited only. It is noted that the Company and Richfield Capital Limited are members of the same Group of Companies.

6.2. Trading rules for specific markets or market conditions may prevent the Company from following certain of the Client’s instructions.

7. Execution on Client Orders

7.1. The Company shall satisfy the following conditions when carrying out Client Orders:

The Company evaluates and selects the Execution Venues based on a number of criteria including but not limited to the regulatory status of the institution, the ability to deal with large volume of Orders, the speed of execution, the competitiveness of commission rates and spreads.

Where there is only one possible Execution Venue, best execution is achieved by execution on that venue. Best execution is a process, which considers various factors, not an outcome. This means that, when the Company is executing an order for a Client, the Company must execute it in accordance with its execution policy. The Company does not guarantee that the exact price requested will be obtained in all circumstances and, in any event, the factors may lead to a different result in a particular transaction.

The Execution Venues may be changed at the Company’s discretion by giving at least one (1) business day prior notice to the Clients on the Website.

7.2. The Client acknowledges that the transactions entered in Financial Instruments with the Company are not undertaken on a recognized exchange/regulated market, rather they are undertaken over the counter (OTC) and as such they may expose the Client to greater risks than regulated exchange transactions/Orders.

8. Client’s Consent

8.1. By entering into a Client Agreement with the Company for the provision of Investment Services, the Client is consenting to an application of this Policy on him (i.e. this Policy forms part of the Client Agreement found at (Click here).

9. Amendment of the Policy and Additional Information

9.1. The Company reserves the right to review and/or amend its Policy and arrangements whenever it deems this appropriate according to the terms of the Client Agreement. It should be noted that the Company will not notify Client separately of changes, other than substantial material changes to the Policy, and Clients should therefore refer from time to time to the website of the Company at (Click here) for the most up to date version of the Policy.

9.2. Should you require any further information and/or have any questions about this policy please direct your request and/or questions to [email protected].